Fido Fave Automatic Pet Water Fountain — 2.64 Gal, Black, 60-Day Battery

Still water in a bowl loses appeal fast — and refilling a small bowl daily while it slowly builds up residue is the kind of recurring chore that's easy to delay. Cats and dogs naturally drink more from moving water than from a standing pool.

This 10-liter cordless fountain keeps water moving and filtered continuously. Triple-layer filtration captures hair, dust, and impurities, while the ultra-quiet pump circulates water in a stream that most pets drink from more readily than a bowl. Three modes — motion-activated, timed release, or continuous flow — let you match water delivery to your pet's habits and schedule. The 4000mAh battery runs up to 60 days between charges; Type-C restores a full charge in 5–6 hours, so no permanent outlet is needed.

• 10L / 2.64 Gal capacity — fewer refills for large dogs, multi-pet households, or anywhere reducing daily maintenance matters.
• Triple-layer filtration captures hair, dust, and impurities to keep water clean and fresh.
• Three drinking modes (motion sensor / timed / continuous flow) — match the fountain to your pet's drinking habits and your home routine.
• 4000mAh battery lasts up to 60 days per charge, with Type-C charging in 5–6 hours — place it anywhere, no outlet required.
• Ultra-quiet pump keeps hydration calm and stress-free for pets of all ages and temperaments.

Works Best On

Large dogs, multi-dog homes, and any household where reducing daily water management matters. Also suitable for multi-cat homes or mixed cat and dog households. The cordless design means placement isn't limited by outlet location.

Not ideal for: Single small cats may not need a 10L reservoir — the smaller 5L stainless model (PT004) is more proportionate for 1–2 cats. In freezing outdoor temperatures, keep indoors only.

How to Use

1. Set up and install filter: Rinse all components and install the activated carbon filter in the housing. Fill to the max fill line with fresh water.
2. Select a drinking mode: Choose motion sensor (activates when pet approaches), timed (set release schedule), or continuous flow. Press the mode button to cycle through options.
3. Monitor water level: The LED indicator shows blue when water is sufficient and red when the level is low — refill before it reaches red.
4. Replace filters and clean regularly: Swap the filter every 3–4 weeks (use PT002 6-pack replacement filters). Disassemble and wipe clean the stainless components every 1–2 weeks.

Frequently Asked Questions

Does it need to be plugged in?
No — the 4000mAh battery runs up to 60 days on a single charge. Charge with the included Type-C cable in 5–6 hours. You can place it anywhere in your home without needing an outlet nearby.

How do I know when the water is low?
An LED indicator on the fountain changes from blue (sufficient water) to red (refill needed). Check the indicator periodically — or when you notice your pet spending more time at the fountain without drinking.

What filter should I use?
PT002 6-pack activated carbon replacement filters are the compatible replacement for this fountain. Replace every 3–4 weeks; one 6-pack covers approximately 6 months.

What's the difference between the three modes?
Motion sensor mode activates the pump only when your pet approaches — quietest and most battery-efficient. Timed mode runs the pump on a set schedule. Continuous mode keeps water moving at all times — best for households with multiple pets drinking at different times.

How do I clean it?
Disassemble once every 1–2 weeks for a thorough clean. The stainless steel drinking components wipe clean easily under warm water. Replace the carbon filter every 3–4 weeks to maintain water quality.